Kohler natural gas generator enclosure beside a commercial building

Generac Power Systems ยท Residential, light commercial and commercial

Generac transfer switch. Fixed or replaced.

Repair, retrofit and replacement for Generac automatic transfer switches. We find the failure first, then price repair and replacement side by side.

Free quote

Start your request.

A request doesn't commit you to anything. We use your details only to answer it.

Every ATS brandASCO to Generac
Repair or replaceTwo prices, side by side
Home to critical power100 A to service-entrance
NationwideMajor metros, coast to coast

Generac models

Switches we see.

Generac RTS / RTSW / RTSN
Residential and light commercial automatic transfer switches, 100 to 400 amps.
Generac smart switches (RXSW / RXSC)
Newer residential switches with load management options.
Generac pre-wired circuit switches
Essential-circuit switches with a small built-in load center.
Generac GTS / HTS / MTS
Commercial transfer switches paired with larger Generac units.

Failure symptoms

Typical Generac faults.

  • Generator runs but the house stays dark
  • Power comes back but the switch never returns to utility
  • Clicking or chattering contactor in the switch
  • Burned terminals, melted lugs or a hot smell at the switch
  • Controller shows an alarm tied to the transfer switch
  • Water, rust or insect damage inside an outdoor switch
What each symptom usually means

Replace or retrofit

Your Generac switch.

On home systems the contactor, the control board and the line-side lugs are the usual failures. Many can be repaired. If the switch is corroded, the contactor is welded, or you're adding load like an EV charger or heat pump, a new switch sized to your panel is usually the right call. We make sure the replacement works with your generator's controller.

More on repair vs replacement and what drives cost.

Questions

Generac answers.

Do you repair Generac transfer switches?

Yes. We troubleshoot and repair Generac automatic transfer switches, and replace them when repair doesn't make sense. We're an independent service company, not a factory-authorized Generac dealer.

Should I repair or replace my Generac switch?

On home systems the contactor, the control board and the line-side lugs are the usual failures. Many can be repaired. If the switch is corroded, the contactor is welded, or you're adding load like an EV charger or heat pump, a new switch sized to your panel is usually the right call. We make sure the replacement works with your generator's controller.

How fast can you look at my Generac switch?

Send the model and a photo of the nameplate. We call you back to confirm scheduling for your address.

Dixiana Power service truck, a black GMC Sierra 3500 HD service-body dually, outside the shop

Who answers

A real crew. Not a call center.

Fix My ATS is run by Dixiana Power, a generator company that buys, sells and services standby power equipment. When you send a request, the Dixiana team reads it and calls you back.

No lead auctions. No auto-replies pretending to be a person. Straight answers on what failed and what it costs to fix.

Generac switch acting up? Send the model and a photo.

Generac is a trademark of its owner, used here only to identify the equipment we service.

Call (803) 391-5411